Edging

Edging 2017-06-07T13:19:24+00:00

Finishing the sharp edges of cut glass is applied for safe handling, chip reduction, or aesthetics.   We can provide angled and multilevel bevels, seams, corner dubbing, circle or flat ground, pencil, and polished edging.

JNS Glass, Flat glass fabrication, Machine Vision Filters, UV IR Filters machine vision

Flat Ground Edges

Diamond embedded grinding wheels put a satin finish on the edge.

Flat Polish Edges

Taking a ground edge another step, polishing the edges to give the glass a nice sheen finish.

Flat Polish Edges with Arris

This is a flat polished edge with polished chamfers (Arris).

Pencil Ground Edges

Diamond embedded grinding wheels put a satin finish on the edge, with an edge radius similar to pencil or C-shape.

Pencil Polished Edges

Edges are polished to a sheen finish, with adius similar to pencil or C-shape.

Safety Seamed Edge

(Swiped Edge, chamfered edge) A sanding belt is used to lightly sand off the sharp edge of the glass.

Dubbed Corners

The sharp edge of each corner can be nubbed or broken as required (chamfered or radius corner).

Stepped and Route Surfaces

Glass is ground away to leave a step or lip.

Beveled Edges

(3) styles – Ground or polished bevels on glass or mirror, circles, rec-tangles to any degree can be provided

Bullnose Edges (Half & Full)

These are typically polished edges (can be ground if required) that are similar to pencil edges, the difference being that the bullnose edge is a full radius curve where the diameter matches the thickness of the glass substrate. There are specific profiles where the relief angles can be different, typically where aesthetics are important or for critical applications where the edge of the glass could affect functionality.